Customised Alarm Installer Test Kit

Select four mixed products from the range below and receive a ACT 9268 ABS case - worth £85 - free of charge.

Select four MIXED products below:

ACT 2000 Manual Multimeter

The ACT 2000 is an ideal multimeter for alarm installers which offers excellent value and performance. A quality 3½ digit 1999 count multimeter with a total of 26 ranges. It enables resistance, voltage and mA current readings to be made without moving the test lead socket positions.
Supplied in a robust ABS case with flip stand, test leads and operating manual.

ACT 3000 Autoranging Multimeter

The ACT 3000 autoranging multimeter has a total of 27 ranges and includes a manual range ‘overide’ button to allow the user to fix selection on any of its ranges as required. An extra large 3200 count with bargraph LCD display gives a clear indication of readings on resistance, voltage and current, as well as polarity, function, over range, data hold and low battery indication.

ACT 720 Troubleshooting Datalogging Multimeter

The NEW 720 Troubleshooting Datalogging Multimeter incorporates a wide range of features to effectively test and troubleshoot alarm systems. It will troubleshoot alarm circuit cables & detection devices, log resistance readings, verify operation devices and download results on to a PC.

ACT Rapport337 CCTV Multimeter

The Rapport337 is a CCTV multifunction test meter that provides the necessary functions in one compact unit needed to install and maintain CCTV and alarm systems. Functions include digital multimeter, CCTV field monitor, video sign generator, PTZ controller, PTZ protocol analyser and UTP cable tester.

ACT CA60 mA Current Clamp

The ACT CA60 mA current clamp measures AC/DC current from 10mA to 60Amps without disconnecting circuit wires. It is designed to work in narrow spaces and connects to any multimeter with a 200mV or 2 volt range.

ACT NETcat Pro Digital Cable Tester

The NETcat Pro is a highly effective cable tester designed for fast, accurate checking of cables, wiring and network servicing. This touch-screen operated tool will conduct a broad range of tests from fault finding to TDR length measurement. Includes a multi-tone cable tracing facility and is capable of identifying and troubleshooting network devices.

ACT 620K Cable Tracer

The 620K is a combined audible cable tracer and continuity tester that makes cable tracing and troubleshooting quick and easy. Used to trace cables hidden behind plaster or under floorboards up to one meter away. Enables EM/RF interference and intermittent shorts or breaks to be identified.

ACT 452 Telephone Test Set

The 452 Telephone Test Set is designed for testing lines and verifying signals sent to the alarm receiving centre during commissioning and maintenance inspections. Includes Digital Service Protection (DSP) which enables safe operation were telephone wiring may carry digital signals, hazardous voltages or fault connections. Protected against 230VAC and lightening surges.

ACT GOLD-IBT Intelligent Battery Tester

Fast, accurate and easy to use, the GOLD-IBT Intelligent Battery Tester is the only award winning battery tester on the market. It simulates a 20 hour battery discharge test in just six seconds and will automatically display ambient temperature, DC voltage and Ampere hour capacity available in a battery. User may tests 12 volt SLA and car batteries from 1.2Ah to 200Ah and identify batteries that need recharging or replacing.

ACT 1330 Digital Light Meter

The 1330 Digital Light Meter is a portable and precision instrument designed for simple operation and accurate readings. Will read the intensity of light falling on to an area and take measurement readings up to a range of 20000 lux. Fully cosine corrected for the angular incidence of light.

ACT 1502 Digital Sound Level Meter

The 1502 Sound Level Meter is precisely calibrated to take accurate measurements of noise levels from areas such as offices, schools and factories, as well as testing sound levels of fire alarm systems. Also suitable for checking the acoustics of studios, auditoriums and home stereo applications. It is manufactured to meet IEC 60651, ANSI S1.4 TYPE 2 standards.

Product

Price

Qty

ACT 2000 Manual Multimeter

£35.00

ACT 3000 Autoranging Multimeter

£75.00

ACT 720 Troubleshooting Multimeter

£187.00

ACT Rapport337

£337.00

ACT CA60 mA Current Clamp

£85.00

ACT NETcat Pro Cable Tester

£175.00

ACT 620K Cable Tracer

£95.00

ACT 452 Telephone Test Set

£79.00

ACT GOLD-IBT

£148.00

ACT 1330 Light Level Meter

£49.00

ACT 1502 Sound Level Meter

£89.00

ACT 9268 ABS Case

£0.00